View 67-21B-G6C-BR1S2B-BT_4347469.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs With Lens
67-21B/G6C-BR1S2B/BT
Features
P-LCC-2 package. High flux output. High current capability. White package. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Suitable for automatic placement equipment. Suitable for reflow and wave solder processes. Available on tape and reel (12mm Tape). Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
The 67-21B series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
Applications
Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use.
Device Selection Guide
Chip Material AlGaInP Brilliant Yellow Green Water Clear Emitted Color Lens Color
Everlight Electronics Co., Ltd. Device No. :DSE-67B-056
http://www.everlight.com prepared date:29-May-2007
Rev. 1
Page: 1 of 10
prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/G6C-BR1S2B/BT
Package Dimensions
C L
2.20.1 2.80.2
+
Polarity
-
C L
3.250.2
3.0
For reflow soldering (propose)
Notes: Tolerances Unless Dimension 0.1mm,Unit = mm
Everlight Electronics Co., Ltd. Device No. :DSE-67B-056
http://www.everlight.com prepared date:29-May-2007
Rev. 1
Page: 2 of 10
prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/G6C-BR1S2B/BT
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 60 60 2000 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V
Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec.
Electronic Optical Characteristics (Ta=25) :
Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol Iv 21/2 p d VF IR Min. 112 --------567.5 ----1.75 ----Typ. ----60 575 ----20 --------Max. 285 --------575.5 ----2.35 10 Unit mcd deg nm nm nm V A Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V
Notes: 1.Tolerance of Dominant Wavelength: 1nm 2.Tolerance of Luminous Intensity: 11% 3.Tolerance of Forward Voltage: 0.05V
Everlight Electronics Co., Ltd. Device No. :DSE-67B-056
http://www.everlight.com prepared date:29-May-2007
Rev. 1
Page: 3 of 10
prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/G6C-BR1S2B/BT
Bin Range of Dom. Wavelength
Group Bin Code C15 B C16 C17 C18 Min 567.5 569.5 571.5 573.5 Max 569.5 571.5 573.5 575.5 nm IF=20mA Unit Condition
Bin Range of Luminous Intensity
Bin Code R1 R2 S1 S2 Min. 112 140 180 225 Max. 140 180 225 285 mcd IF=20mA Unit Conduction
Bin Range of Forward Voltage
Group Bin 0 B 1 2 Min 1.75 1.95 2.15 Max 1.95 2.15 2.35 V IF=20mA Unit Condition
Notes: 1.Tolerance of Dominant Wavelength: 1nm 2.Tolerance of Luminous Intensity: 11% 3.Tolerance of Forward Voltage: 0.05V
Everlight Electronics Co., Ltd. Device No. :DSE-67B-056
http://www.everlight.com prepared date:29-May-2007
Rev. 1
Page: 4 of 10
prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/G6C-BR1S2B/BT
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. Device No. :DSE-67B-056
http://www.everlight.com prepared date:29-May-2007
Rev. 1
Page: 5 of 10
prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/G6C-BR1S2B/BT
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. :DSE-67B-056
http://www.everlight.com prepared date:29-May-2007
Rev. 1
Page: 6 of 10
prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/G6C-BR1S2B/BT
Carrier Tape Dimensions: Loaded quantity 500 PCS per reel.
Polarity
Note: The tolerances unless mentioned is 0.1mm Unit = mm
Moisture Resistant Packaging
+
Label
Everlight Electronics Co., Ltd. Device No. :DSE-67B-056
Aluminum moisture-proof bag Desiccant Label
http://www.everlight.com prepared date:29-May-2007 Rev. 1 Page: 7 of 10 prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/G6C-BR1S2B/BT
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10%
No. 1 2
Items Reflow Soldering Temperature Cycle
Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. 22 PCS.
Ac/Re 0/1 0/1
3 4 5 6 7
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No. :DSE-67B-056
http://www.everlight.com prepared date:29-May-2007
Rev. 1
Page: 8 of 10
prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/G6C-BR1S2B/BT
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
Everlight Electronics Co., Ltd. Device No. :DSE-67B-056
http://www.everlight.com prepared date:29-May-2007
Rev. 1
Page: 9 of 10
prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
67-21B/G6C-BR1S2B/BT
5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No. :DSE-67B-056
http://www.everlight.com prepared date:29-May-2007
Rev. 1
Page: 10 of 10
prepared by: Tracy

▲Up To Search▲

Price & Availability of 67-21B-G6C-BR1S2B-BT

	To Download 67-21B-G6C-BR1S2B-BT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .